hydraulic busbar punching machine
hydraulic busbar punching machine often has several types of failures
Systematic faults refer to certain faults that will surely occur as long as certain conditions are met; random faults refer to faults that occur occasionally under the same conditions. The analysis of such faults is more difficult, usually related to the part of the mechanical structure of the machine tool. Loosening and dislocation, drifting or decreasing reliability of some electrical parts, and high internal temperature of electrical devices are related. The analysis of this type of failure requires repeated trials and comprehensive judgments before it can be eliminated.
Not allow reproduction of Destructive failures that damage the workpiece or even the machine tool during maintenance.
At this time, we can only eliminate the failure according to the corresponding inspection and analysis of the phenomenon when the failure occurs.
The technical requirements are difficult and there are certain risks.
If the workpiece damaged, we can unload the workpiece, and customize the busbar processing machine, try to reproduce the failure process while being very careful.
Numerical control systems design with rigorous self-diagnosis programs, which monitor the software and hardware performance of the entire system.
Once find a fault, it will immediately alarm or display a brief text description on the screen. Combining the system with the diagnostic manual can not only find the fault The reason and location of the occurrence, as well as the method of exclusion.
The machine tool manufacturer will also design relevant fault indications and diagnosis instructions for the specific machine tool. Faults with diagnostic indications and various indicators on various electrical devices make it easier to eliminate most electrical faults. Part of the failure without diagnostic indication is caused by the incompleteness of the above two diagnostic programs. This type of failure depends on the working process before the failure, the failure phenomenon and the consequences, and the maintenance personnel’s familiarity and technical level of the machine tool. To analyze and exclude.
When the no-load transformer is opened, there may be an operating overvoltage. When the neutral…
The amorphous alloy oil-immersed transformer is a kind of transformer made of an amorphous alloy…
copper busbar processing machine consists of three units- a punching unit, a cutting unit, and…
HV Winding Machine is mainly used for winding a wide range of HV coils for distribution…
cnc busbar machine is mainly processing all kinds of copper, and aluminum busbars, the user…
During the operation of the low-voltage foil winding machine, there are dangerous sources such as…
View Comments
I like this post, enjoyed this one thanks for putting up. Reina Hastings Fredella
whoah this blog is great i love reading your articles. Stay up the great work! You already know, lots of people are hunting around for this info, you can aid them greatly. Rosalind Lorrie Shriver
Highly energetic blog, I enjoyed that bit. Will there be a part 2? Beatriz Urbano Eckblad
Hi there. I found your website via Google even as searching for a comparable topic, your web site came up. It appears good. I have bookmarked it in my google bookmarks to visit then. Magdaia Darnall Heyde
Excellent blog post. I definitely appreciate this site. Stick with it! Lily Delmar Cailly
Some extremely valid points! I appreciate you writing this article and the rest of the site is also really good. Leisha
I truly appreciate this post. I have been looking all over for this! Thank goodness I found it on Bing. You have made my day! Thx again Heath Wylie
great site thanks.