SHUOHAO Machinery

Distribution Transformer Coil Winding Machine is different from other winding machines.

In this article let us talk about where is the difference?

Since the production process of the transformer determines the frequent start-up and constant torque requirements of the equipment.

the parameters that the Distribution transformer winding machine needs to set are:

Slow Start and Stop function setting

It is mainly used to control the device to run slowly at startup and stop, which plays a role of soft start and parking buffer.

The correct setting can allow the operator to adapt when starting the winding machine In the process of pulling force.

when the equipment stop, it can be stopped more accurately with buffering.

Number of turns setting of Distribution Transformer Coil Winding Machine

The number of turns setting is the number of turns the device needs to run according to the production process.

It includes total turns and turns corresponding to each step.

when setting, Please note that the total turns are the sum of the turns of each step.

Control of running speed of Distribution Transformer Coil Winding Machine

The running speed uses to control the rotation speed of the equipment during operation.

The setting of the rotation speed needs to combine with the production process and the actual working conditions of the winding.

Too fast and too slow are not conducive to the formation of the coil.

the too rapid operation will not be conducive to the control of the operator.

it also increases the vibration and noise of the equipment.

the too low-speed operation will greatly affect the production capacity and efficiency of the equipment.

and will also affect the torque output of the equipment’s main shaft.

Precautions when installing the machine

With the advancement of science and technology, generally speaking, the use environment of the automatic winding machine has no harsh requirements.

as the distribution transformer coil winding machine contains a large number of electronic components.

they are most afraid of direct sunlight or moisture, dust, and vibration.

All of these can cause the electronic components corroded or deteriorated.

or cause short circuits between the components to cause the winding machine to operate abnormally.

when installing the machine we need to pay attention to them.

Note for users

For users, it is mainly to pay attention to the protection of the surrounding environment.

For example, on rainy days, you must be careful not to bring umbrellas to the production site and keep the production site tidy.

The step sequence function uses to control the sequence of equipment operation.

It is generally determined according to the production process.

The forming and winding of a coil is not only the winding of the enameled wire but also many other steps such as paper wrapping, insulating cloth, etc. ,

So the correct setting of the step sequence function will effectively play the efficiency of the equipment.

 

SHUOHAO MACHINERY MAIN PRODUCTS:

Distribution transformer coil winding machine

busbar machine

foil winding machine